Icing on the cake, The Monza fuel cap

When the build turned out so good other things becomes not so appealing.
The worse bit was the fuel cap.
The ugly red plastic one I've used before just because it was so ugly now turned from funny ugly to a disgrace.
So I took a deep breath and bought the expensive but so classic and beautiful 2,5" Monza fuel cap and a threaded aluminum filler neck.

The Monza cap and filler neck together and the neck is way to long. 

Up in the lathe to shorten it and enlarge the inside to fit over OEM Zündapp filler neck.

 Nice fit, just to thread on the Monza fuelcap.

 Mounted and open.

Mounted and closed

Out in the wild

Finally the little nugget got some sunlight and fresh air.
Rolled it outside to get some real look at it.
And I'm as pleased with it outside as I was inside.
Some minor stuff left like front fender, registration plate holder and kickstand and then deconstruction.
Final welds, some shiny paint on it add a tiny but crucial wire harness and then it's done.

 Left side

Right side

The limited instrument panel

Seat

Rearset

Front wheel

Italjet Dragster, my unicorn

FINALLY I'VE LANDED MY UNICORN!
After almost two decades I've got it !!!!
The 180cc, 19 hp, two-stroke Italjet Dragster.
The coolest scooters of all time,
Hubsteering and spaceframe construction.
All this crowned by the last of the two-stroke generation of big scooter engines.
So now a new chapter opens up at Bombus Speedshop, two-stroke bigblock.
First up bring it back from the neglect done by the previous owner.
Then some basic maintenance like belt, weights and general overall checking.
And then? tuning........?

If this is wrong I don't want to be right.

Controlpanel

One thing​ I've never had before was a instrument cluster.
Not so much a cluster with​ just a tacho, but still.
So first a paper template took form and then transferred to aluminum.
Some cutting, grinding, drilling and letter stamping later I had, in my opinion a super cool dashboard.
The vintage German D Mark coin bought on eBay is from 1967 like my Zündapp.
I also put an ignition lock in the right headlight bracket.
But after this I feel really satisfied with "cockpit" and ignition key installation.

 First a paper template

Then transfer to aluminium

Mounted. D-Mark and warning lights added and text stamped

And finally, the ignition switch in the right headligt bracket

Torque brace

When the definite transition to drumbrake was done a torque brace was needed.
First a temporary template to find angles and hole pattern.
Transfer that to 3mm stainless and voila, a torque brace for the front drum brake converted Kaferacer is Zündapp born.

 Angle and hole positions found with this simple template. 

 Next up designing, more cutting, polishing and mounting but most of all braking. 

The brace done. 

Now just some cosmetic shaping left and maybe some shine. 

Tires

Tires was one of the hardest decisions​.
Amazing how such simple thing can be such hard thing.
In the end the decision fell on the very classic ME77 from Metzler.
I ordered them online and then took them to my friend Lasse at Deep Valley Workshop who mounted them super quick.
Big thanks to Lasse.

 Tires and rims ready to be paired

 The rubber specs

 Make rim strips out of vulcanizing tape

 Lasse at Deep Valley Workshop solved the mounting quick and easy

Finally I had a pair of rubber crowned gems. 

Seat

Next up, the seat.
When the cuts was done I could measure the seat pan.
First a cardboard template that I transferred to sheetmetal.
Some bending to get the same shape like the cuts and then I drilled 8 !!! holes to mount it.
Eight? Yes, to get a snug fit I used eight.
Then welded nuts on it before I covered it with foam.
First one layer of Sleeping Pad and then one layer of Rebond Foam.
Shaped it to a nice appearance and then off to Paul at Bullit Leather to get it upholstered with black Leather which again was kindly donated by my friend Viking Choppers.
This time I went for a classic "diamond stitch" pattern.
But I also got an idea to challenge Paul a bit, stich the Zündapp logo in the leather.
A challenge he passed easy with the highest grade.
Then home and making a testfit and it turned out awesome.
Upholstery is one of the few things I don't do.
The end result when true craftsmen do their trade are unbeatable.

 Template and some cutting

 Cut, bent and nuts welded

 First layer, Sleping Pad

 Second layer, Rebond Foam

 A sneak peak in the making I got from Paul

 Done and mounted

Will be a nice pair with the "tank cuts"